Graham Field GF13603 Manual de usuario descargar pdf

Pull Cord Alarm

Item GF13603

TO INSERT BATTERIES:

Unit uses two alkaline AAA size batteries, included.

1. Remove the two screws on the battery door.

2. Insert batteries. When inserting batteries observe the battery type and polarity (+/-) marking on the unit. Insert

batteries accordingly. Figure 2

3. Replace the battery door and secure with the two screws. Do not overtighten the screws.

USE:

1. Place the Magnetic Sensor in the sensor area. Turn on the unit by sliding the on/off switch to “LO” (for low sound

emission, 85 dB) or “HI” (high sound emission, 95 dB). Figure 1

2. Secure the Magnetic Sensor to the patient by clipping the attached cord to the patient’s clothes. Clip the cord to a

piece of clothing the patient is not likely to remove. The clip should be located out of the patient’s reach, if possible.

Be sur

e that the long pull cor

d cannot entangle or choke the patient. Use the Cor

d Adjuster to adjust the

length of the pull cord. Figure 3

3. A pull on the cord from any direction will cause the Magnetic Sensor to release from the sensor area and sound

the alar

m. The alar

m will sound in a cycle of appr

oximately 3 seconds on, 2 seconds of

f to minimize annoyance to

the patient and surrounding occupants.

4. Stop the alarm either by replacing the Magnetic Sensor or turning the unit off with the on/off switch.

Attaching to a wheelchair:

Pull Cord Alarm is supplied with a holster for attaching the unit to a wheelchair. Insert the strap in the holster and

hang on push handle of wheelchair.

Attaching to a bed:

For a more secure attachment, use the mounting screws included to secure the holster to the headboard.

b. A hook and loop fastener strip is also supplied for easy attachment of the unit to any flat surface such as a

headboard or side of a bed.

GF13603-INS-LABRevA05

Figure 1

Figure 2

APPLICATION:

The Pull Cord Alarm helps prevent falls and improves safety by alerting caregivers when a person attempts to exit a

wheelchair or bed without assistance. A pull on the cord from any direction will dislodge the Magnetic Sensor and

activate the alarm. Attaches easily to a wheelchair with included holster and strap, or to a headboard with included

hook and loop fastener strip or mounting screws.

Figure 3

1 2

Indice de contenidos

Pagina 1 - Pull Cord Alarm

Pull Cord AlarmItem GF13603TO INSERT BATTERIES:Unit uses two alkaline AAA size batteries, included.1. Remove the two screws on the battery door.2. Ins

Pagina 2 - 1 YEAR LIMITED WARRANTY:

Graham-Field Health Products2935 Northeast Parkway, Atlanta, Georgia 30360telephone: 800-347-5678, 770-447-1609fax: 800-726-0601, 678-291-3232http://w

Comentarios a estos manuales

Sin comentarios

Graham Field GF13603 Manual de usuario

Busca en linea o descarga Manual de usuario para No Graham Field GF13603. Graham Field GF13603 User's Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales